Avaya P580 User Manual page 268

Multiservice switches
Hide thumbs Also See for P580:
Table of Contents

Advertisement

Chapter 8
8-56
The set port internal-error-shutdown all-ports disable command
produces system messages similar to the following:
Upon Success:
Internal-error-config disabled on port 3/1
Internal-error-config disabled on port 3/2
Internal-error-config disabled on port 4/1
Internal-error-config disabled on port 4/2
Internal-error-config disabled on port 4/3
Internal-error-config disabled on port 4/4
Slot 6 has 10/100 ethernet ports that are
unsupported and will not be set.
Internal-error-config disabled on port 7/1
Internal-error-config disabled on port 7/2
Internal-error-config disabled on port 7/3
Internal-error-config disabled on port 7/4
Feature disabled for port(s) specified
Port(s) will not be shut down if CRC Threshold
Exceeded.
Upon Failure:
Don't Shutdown all ports failed
The set internal-error-threshold <5-500> command produces system
messages similar to the following:
Upon Success:
Threshold value set to 10
Upon Failure (The only failure that can occur is that the number
entered was not in the range 5 – 500):
Threshold value must be between 5 and 500
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

P882

Table of Contents