Avaya P580 User Manual page 90

Chapter 2
Table 2-6. Configuration File Management Web Page Parameters
Parameter
Save Running-Config
to Startup-Config
Copy Source
Source Filename
Copy Destination
Destination Filename
TFTP Server IP
Address
2-40
2. See Table 2-6 for an explanation of the Configuration File Management
Web page parameters.
Description
Saves the running configuration
to the startup configuration
Specifies the source file to be
copied
Specifies the path and name of
the source file
Specifies the location of the
destination
Specifies the path and name of
the destination file
Specifies the IP address of a
source or destination TFTP
server
File — To copy a file stored on the switch to your running or
—
startup configuration, to a location on the switch, or to a location
on a TFTP server.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Options
N/A
• Unspecified - Specifies an initialized value.
• File - Specifies a source file located on the
switch in NVRAM.
• Running-Config - Specifies a running
configuration.
• Startup-Config - Specifies a startup
configuration.
• TFTP Server - Specifies a source file located
in a directory on a TFTP server.
Source files can be ASCII files in NVRAM
available for upload or files located on a TFTP
server available for download
• Unspecified- Specifies an initialized value.
• File - Specifies that a source is copied or
downloaded to NVRAM.
• Running-Config - Specifies that a source is
copied to the running configuration.
• Startup-Config - Specifies that a source is
copied to the startup configuration.
• TFTP Server - Specifies that a source is
copied to a TFTP server location.
Configuration files and other files can be copied
to NVRAM on the switch or to a TFTP server as
a destination location.
Copy (download) source files, located on a
TFTP server, to your running configuration,
your startup configuration, or a location on the
switch. Or, copy (upload) your configuration
files, or a file located on the switch, to a TFTP
server.