Chapter 8
Viewing IEDR Settings
Viewing IEDR Settings for Hunt Groups
Error Messages
8-54
To set the IEDR threshold:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
set internal-error-threshold <threshold>
To view a list of the ports that have IEDR enabled:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
show port internal-error-config
To view the global IEDR setting for hunt groups:
1. Enter Global Configuration mode.
The CLI displays the (configure)# prompt.
2. Enter the following command:
show huntgroup internal-error-config
* Note: If IEDR detects errors on a port in the huntgroup, it tests each
port within that hunt group. When it finds the first bad port, it
removes it from the Hunt Group and disables the port.
The IEDR feature may display the following error messages:
The following message indicates the IEDR feature is enabled on the
specified ports
internal-error-config enabled on port <x>/
—
<y>
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0