Avaya P580 User Manual page 372

Chapter 12
12-56
Figure 12-26. IGMP Interface Statistics Dialog Box
2. To modify the interface statistics, perform one of the following:
Select one or more interfaces, and then click CLEAR to reset
—
statistics on those interfaces to zero.
Click CLEAR ALL to reset all statistics to zero.
—
Click REFRESH to view the latest interface statistics.
—
3. See Table 12-16 for an explanation of the IGMP Interface Statistics
dialog box parameters:
Table 12-16. IGMP Interface Statistics Dialog Box Parameters
Parameter
IGMP Interface
IP Address
IP Address Mask
State
IGMP Version
This Router is
Group Membership
Querier
Robustness Variable
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Defines the...
IP interface for these statistics.
IP address associated with the interface.
Subnet mask associated with each listed interface.
Current state of the interface. For example, if the
interface is enabled and operating properly, UP is
displayed.
Version of IGMP enabled on each interface.The default
version is V2
Router that was configured or elected to be the
designated group membership querier. The switch
queries hosts on each interface only when it is acting as
the designated querier on that interface.
Setting for the expected packet loss on a subnet. If a
subnet is expected to have more packet loss, the
Robustness Variable should be increased. The
Robustness Variable must not be set to 0 and should not
be set to 1.
The default value is 2
1 of 2