Rear Differential Assemble - TGB BLADE 600 Service Manual

REAR DIFFERENTIAL ASSEMBLE

▪ Install shim into the case as shown.
▪ Install anti slip limited gear assy. into the case
and apply rubber hammer lightly knock to the
position as shown.
▪
Install two dowel pin on the left half case.
▪ Apply Loctite #263 on the eight bolts and cross
tighten.
NOTE: Ensure the O-ring install properly.
Torque: 2.0~2.2kgf-m.
9-2.REAR DIFFERENTIAL
9-2-1