Front Differential Assembly - TGB BLADE 600 Service Manual

9-1. FRONT DIFFERENTIAL
ASSEMBLY
▪ Apply the Loctite #510 on the contact surface
of half case.
NOTE: Before apply Loctite, clean the old glue.
▪ Cross tighten the bolts as shown.
Torque : 120~150kgf-cm)
▪ Apply the Loctite #510 on the contact surface
of LOCK cover.
NOTE: Before apply Loctite, clean the old glue.
▪ Install the dowel pin.
▪ Cross tighten the LOCK cover bolts as shown.
Torque : 120~150kgf-cm)
9-1-2