Cylinder Head Removal - TGB BLADE 600 Service Manual

6. CYLINDER HEAD/VALVE

Cylinder Head Removal

engine. (Refer to chapter 5) Remove the inlet
pipe (2 bolts)
Remove 1 bolt of thermostat and then remove
the thermostat.
Remove hole bolt and spring for the cam chain
tensioner.
Loosen 2 bolts, and then remove tensioner.
Remove thermostat (2 bolts).
Remove spark plug
Remove the screws of cylinder head.(2 bolts)
Remove the nuts of cylinder.(2 nuts)
6-4
Remove
Thermostat bolts
Bolts
Tensioner bolts