Pressure Regulator Removal/Installation - TGB BLADE 600 Service Manual

PRESSURE REGULATOR
REMOVAL / INSTALLATION
NOTE:
• Remove the pressure regulator mounting bolts and
cover then remove the pressure regulator.
• Disconnect injector fuel hose (2) to release
fuel pressure.
• Disconnect fuel supply hose (1).
• Disconnect fuel return hose (3).
NOTE:
• Recommends that hose clamp be discarded and
replaced each time they are removed or loosened.
They are one time usage only.
Special Tool:
• Install the pressure regulator in the reverse order of
removal.
TORQUE: 100kgf-cm
4-1. FUEL INJECTION SYSTEM
4-1-23