Drive Shaft Boot Installation; Front Differential Removal - TGB BLADE 600 Service Manual

9-1. FRONT DIFFERENTIAL
INSTALLATION
▪ For installation, reverse the removal
procedure.
▪ Install new circlip.
▪ Pack bearing area with grease.
NOTE: Do not use or add other grease.
▪ Install new drive shaft clamps.
FRONT DIFFERENTIAL
REMOVAL
Caution
Be sure the differential set temperature below
35℃
▪ Drain the differential oil.
▪ Remove both drive shafts.
▪ Detach vent hose from front differential.
▪ Remove 2WD/4WD mode select cables.
▪ Remove LOCK mode select cables.
▪ Remove securing the differential bolts and
nuts.
9-1-2