TGB BLADE 600 Service Manual page 13

1. GENERAL INFORMATION
● Do not let the wire harness been twisted as
installation.
● Wire harnesses routed along the handlebar
should not be pulled too tight or have
excessive slack, be rubbed against or
interfere with adjacent or surrounding parts in
all steering positions.
● Before operating a test instrument, operator
should read the operation manual of the
instrument. And then, conduct test in
accordance with the instruction.
Do you know how to set
the instrument to its
measurement position and
the insert locations of its
two probes?
1-8
● With sand paper to clean rust on connector
pins/terminals if found and then conduct
connection operation later.
Clean rust