Flywheel Removal - TGB BLADE 600 Service Manual

10. ALTERNATOR/STARTING CLUTCH
Check the oil seal for wear or damage.
Oil seal
Replace it if necessary.
Install a new one bearing (16005) by bearing
driver.
Bearing

Flywheel Removal

Remove left crankcase cover.
Flywheel nut
Remove starter reduction gear and shaft. Pull
out flywheel with A.C.G. flywheel puller.
Special tool:
A.C.G. Flywheel puller (440659)
Remove flywheel and starting driven gear.
10-4