Lock Switch - TGB BLADE 600 Service Manual

16. ELECTRICAL SYSTEM

Lock switch

Pin
1 39 44 45
Position
LOCK
Wire Color Black W/L W/O Pu/W
Remove three bolts from the frame.
Remove the transfer shift cables of right and left
side from the front differential assy.
Note：
Check if the servomotor„s condition is poor,
please replace with the new one.
Remove the wire from the lock controller.
Then, remove the servomotor.
Check：
Be sure that lock controller should not be
damaged.
If happening, please replace with the new one.
Installation
Install the removed parts in the reverse
order of removal.
16-18