Light / Bulb; Replacing Bulb For Headlight - TGB BLADE 600 Service Manual

Light / Bulb

Replacing Bulb for Headlight

Remove waterproof cover for the headlight.
Remove 2 coupler.
Remove bulb setting hook.
T ake out the bulb connector and the bulb.
Replace with new bulb if necessary.
(Main beam H3 12V 55W)
(Dipped 12V 55W)
Caution
● Never touch the bulb with finger, which will
create a heat point.
●Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order
of removal.
Upon completion of replacement, turn on the
main switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
16. ELECTRICAL SYSTEM
16-13