11. CRANKSHAFT / CRANKCASE
STARTER CUP
Apply engine oil to the O-ring and lip of the oil
seal.
Install the starter cup.
Tighten the starter cup nut by using a suitable
bar.
Starter cup nut: 35 N.M( 3.5 kgf- m, 25 lb-ft)
Cup, Starter Holder (440658)
Install 4 studs, and then put 2 gaskets and 2
O-rings.
Install the oil pipe.
Gasket
Stud
O-ring
Put 4 spring washers and tighten 4 nuts.
Spring Washer
Special torque: 1.2 kgf- m
Nut
Oil pipe
11-18