Front Differential Disassembly - TGB BLADE 600 Service Manual

▪ Lift up the differential and slide forward to
detach from the propeller shaft.
▪ Remove the front differential by pulling it from
the RH side.
NOTICE: Be careful not to knock or to bend
vent hose fitting while removing front
differential.
▪ Loose and remove six bolts on the LOCK
cover.
▪ Check the shift fork oil seal, replace if damage.
▪ Check the LOCK cover bearing, replace if
necessary.

FRONT DIFFERENTIAL DISASSEMBLY

▪ Loose and remove six differential housing
bolts then separate half housings.
9-1. FRONT DIFFERENTIAL
9-1-1