Freeze Data - TGB BLADE 600 Service Manual

4-1. FUEL INJECTION SYSTEM
Move the cursor to "History" and press "ENTER" to continue
After entering the page, press ▲▼ to view all the Diagnostic Trouble Code occurred in the
past.
After viewing the Diagnostic Trouble Code, press ESC to return to the previous page.
※
After viewing the content of "Current" or "History" Diagnostic Trouble Code, press ESC to
return to the previous page, you will see two more items on the screen - "Freeze Data" and
"Erase DTC".
"Freeze Data" is the data recorded when FIRST Diagnostic Trouble Code occurred, and one
time only record one Diagnostic Trouble Code freeze data, it's for saving the engine dynamic
data for further analysis.
"Erase DTC" is the function to erase all Diagnostic Trouble Code in both "Current" and
"History".

2-3. Freeze Data

This is the content you will see when entering into the "Freeze Data". Press ▲▼ to view the
Freeze Data.
★ NOTE: not all ECU support this function.
Numerical analysis of images (1 / 3), the waveform can be displayed as shown in the
following items:
4-1-62