Shock Absorber Installation; Lower Arm Removal; Lower Arm Installation - TGB BLADE 600 Service Manual

- Seizing or binding condition except at
extreme end of either stroke.
- Oil leakage.
- A gurgling noise, after completing one full
compression and extension stroke.
▪ Replace if any faults are present.

Shock Absorber Installation

For installation, reverse the removal procedure.
▪ Make sure to install the proper type of shock
absorber on vehicle.
TORQUE: 48 Nm +/- 6.
LOWER A ARM
Lower A Arm Removal
1. Safety lifts and supports the vehicle off the
ground.
2. Remove wheel.
3. Remove bolts and nut securing lower ball
joint to knuckle.
4. Remove bolts and nuts securing A arm to
frame.
5. Remove A arm.
Lower A arm installation
For installation, reverse the removal procedure.
TORQUE: 48 Nm +/- 6.
15-1-1. STEERING SYSTEM AND SUSPENSION
15-1-1