10. ALTERNATOR/STARTING CLUTCH
Precautions in Operation
General information
● Refer to chapter 17: The troubleshooting and inspection of alternator
● Refer to chapter 17: The service procedures and precaution items of starter motor
Specification
Item
ID of starting clutch gear
OD of starting clutch gear
Torque value
Flywheel nut
Not to be reused should be replaced when disassembled
Starting clutch hexagon bolt
8 mm bolts
12 mm bolts
Tools
Special tools
A.C.G. flywheel puller: 440659
10-2
Standard value (mm)
29
52.548~52.445
16~18kgf-m
1.2~1.5kgf-m with adhesive
2.8~3.0kgf-m
1.0~1.4kgf-m
Limit (mm)