Starting System; Starting Circuit Diagram; Inspection On Starter Relay - TGB BLADE 600 Service Manual

16. ELECTRICAL SYSTEM

Starting System

Starting circuit diagram

W R
B/W
F
N
R
Change Switch

Inspection on starter relay

Open the main
switch. Press the
brake.
Push down the starter switch.
If a sound of "Looh Looh" is heard, it indicates
the relay function normally.
Remove the seat.
Disconnect the negative cable terminal of
the battery.
Disconnect the cable positive terminal from
the relay.
Disconnect the positive cable of the starter motor.
Disconnect the coupler of the relay.
Connect an ohmmeter to the large terminal end.
Connect the yellow/red cable to the battery
positive terminal and the black / blue cable to the
battery negative terminal.
Check the continuity of the large terminal end. If
there is no continuity, replace the relay.
16-10
C.D.I
BR/B
B
Brake
Switch
G/Y
Starter Relay
B1/W
Starter Switch
G/Y
Main Switch
Fuse 20A
B
Main Fuse 30 A
Starter Motor
Brake light
B Black
B1 Blue
R Red
G Green
W White
R
Y Yellow
BR Brown
Battery
G