Oil Pump Removal; Oil Pump Disassembly - TGB BLADE 600 Service Manual

3.LUBRICATION SYSTEM
Oil Pump

Oil Pump Removal

Remove the one way clutch.
Remove the clutch shoe.
Remove the snap ring.
Remove the washer.
Remove the oil pump driver gear.
Caution
The clutch shoe nut has left-hand threads.
Remove the snap ring.
Remove the washer.
Remove the oil pump driver gear.
Remove the pin.
Remove the washer.
Make sure that pump shaft can be rotated freely.
Remove 3 screws on the oil pump, and then
remove oil pump.

Oil Pump Disassembly

Remove the screws on oil pump cover and
remove the cover.
Remove oil pump shaft roller and shaft.
3-4
One way clutch
Snap
ring
3 screws
Pin
1 screw