Inspection On Regulator Rectifier - TGB BLADE 600 Service Manual

Inspection on regulator rectifier

Remove the seat, rear carrier and rear fender.
Disconnect two 3 pin couplers of the regulator
rectifier.
Inspection the rectifier coupler to the wire
harness passes the condition.
Item Check Points Standard Value
Main switch
Bl – B
connection
Battery
Bl – B
connection
B – B
Charging coil
If the readings measured are not normal, check
parts in the circuit.
If the parts are normal, then trouble is in the
wiring.
If there is nothing wrong with parts and wiring,
replace the regulator rectifier.
Battery voltage
(ON)
Battery voltage
0.1 ~ 0.5Ω
16. ELECTRICAL SYSTEM
16-7