TGB BLADE 600 Service Manual page 22

Table of Contents

Advertisement

Check and adjustment
Check ignition timing (using
ignition lamp)
Normal
Adjust the airscrew of
carburetor
Good
Air sucked through carburetor
gasket
No air sucked
Remove spark plug, install
spark plug into spark plug cap
and perform spark test against
engine ground
Good spark
D. Engine runs sluggish (High speed)
Check and adjustment
Check ignition timing
Normal
Check for fuel supplying
system in automatic fuel cup
Good
Check if carburetor clogged
No clogged
Fault condition
Abnormal
Poor
Air sucked
Poor
Fault condition
Abnormal
Abnormal
Clogged
1. GENERAL INFORMATION
Probable causes
● Incorrect ignition timing (malfunction
of Ignition Coil or AC alternator)
● Rich mixture (loosen the screw)
● Lean mixture (tighten the screw)
● Poor heat insulation gasket
● Carburetor lock loose
● Poor intake gasket
● Poor carburetor O-ring
● Vacuum hose crack
● Spark plug fouled
● Malfunction of Ignition coil
● Malfunction of AC generator
● Malfunction of ignition coil
● Open or short circuit in spark plug
leads
● Malfunction of main switch
Probable causes
● Malfunction of CDI
● Malfunction of AC alternator
● Insufficient fuel in fuel tank
● Fuel filter clogged
● Restricted fuel tank vent
●Cleaning
1-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blade 500

Table of Contents