Clutch Cover; Oil Filter - TGB BLADE 600 Service Manual

11. CRANKSHAFT / CRANKCASE
Tighten the movable drive face nut to the
specified torque with the special tool.
Movable drive face nut: 115 N．M( 11.5 kgf-
m,85 lb-ft)
Clutch And CVT Holder (440666)
NOTE:
Turn the fixed drive face until the belt is seated
in and both the drive and driven faces check the
belt without slip.

CLUTCH COVER

Install the dowel pins and new gasket.
Install the clutch cover.

OIL FILTER

Apply engine oil lightly to the O-ring.
Install the oil filter turning it by hand until feeling
that the filter gasket contacts the surface of
case. Then Tighten it 2 turns using the oil filter
wrench.
Oil filter Installer/Remover (440670)
11-13