Rear Differential Removal - TGB BLADE 600 Service Manual

9-2. REAR DIFFERENTIAL
REAR DIFFERENTIAL
REMOVAL
Caution
Be sure the differential set temperature below
35℃
▪ Drain the differential oil.
▪ Remove both drive shafts.
▪ Detach vent hose from rear differential.
▪ Remove the lock mode cables.
▪ Remove the four bolts and bracket as shown.
▪ Remove the upper front end three bolts from
the frame as shown.
▪ Remove front end upper and bottom bolts as
shown.
▪ Lift up the differential and slide backward to
detach from the propeller shaft.
▪ Remove the rear differential by pulling it from
the RH side.
NOTICE: Be careful not to knock or to bend
vent hose fitting while removing front
differential.
9-2-2