Rear Wheel - TGB Blade 525 Service Manual

16. REAR BRAKE & REAR WHEEL & REAR CUSHION

Rear Wheel

Removal
Raise the rear wheels off the ground by placing
a jack or other support under the frame.
Remove the rear wheel nuts, and then remove
rear wheels.
Installation
Install the rear wheel and tighten the nuts.
Torque: 2.4kgf-m
Removal
Remove the brake caliper 2 nuts. and then
remove the brake caliper.
Installation
Install the rear wheel shaft connecter.
Install wheel shaft connecter washer and
tighten the wheel shaft connecter nut.
Torque: 2.4kgf-m
Install cotter pin.
16-4
PDF created with pdfFactory Pro trial version
To this chapter contents
www.pdffactory.com