TGB BLADE 600 Service Manual page 266

15-1-1. STEERING AND SUSPENSION
UPPER A ARM
Upper A Arm Removal
1. Safety lifts and supports the vehicle off the
ground.
2. Remove wheel.
3. Remove bolts and nuts securing A arm to
frame.
4. Remove bolts and nut securing upper
knuckle.
5. Carefully move brake hose aside.
6.. Remove A arm.
Upper A Arm Installation
For installation, reverse the removal procedure.
Install a new cotter pin to secure ball joint nut.
Both end of cotter pin must be folded.
TORQUE: 48 Nm +/- 6.
TORQUE: 48 Nm +/- 6.
15-1-16