Oil Pump - TGB BLADE 600 Service Manual

11. CRANKSHAFT / CRANKCASE
Assemble the crankcase within few minutes.
NOTE:
After crankcase screws have been tightened,
check if crankshaft rotate smoothly.
Fit the clamp to the bolt.
Check the each shaft rotates smoothly after the
crankcase bolts have been tightend.

OIL PUMP

Install the oil pump.
Install the washer and pin.
Install the oil pump driven gear.
Install the snap ring with snap ring pliers.
NOTE:
Assemble the oil pump gear as show.
11-9