Headlight Beam Distance; Clutch Shoe Wear; Cushion - TGB BLADE 600 Service Manual

2. MAINTENANCE INFORMATION

Headlight Beam Distance

Turn on main switch.
Headlight beam adjustment.
Turn the headlight adjustment screw to adjust
headlight beam high.
Caution
●To adjust the headlight beam follows related
regulations.
● Improper headlight beam adjustment will
make in coming driver dazzled or insufficient
lighting.

Clutch Shoe Wear

Run the ATV and increase throttle valve opening
gradually to check clutch operation.
If the ATV is in forward moving and shaking,
check clutch disc condition. Replace it

Cushion

Warning
●Do not ride the ATV with poor cushion.
● Looseness, wear or damage cushion will
make poor stability and drive-ability.
Front cushion
Press down the front cushion for several times to
check it operation.
Check if it is damage
Replace relative parts if damage found.
Tighten all nuts and bolts.
Rear Cushion
Press down the rear cushion for several times to
check it operation.
Check if it is damage
Replace relative parts if damage found.
2-10