Steering System General - TGB BLADE 600 Service Manual

STEERING SYSTEM
GENERAL
During assembly/installation, use the torque
values and service products as in the exploded
view.
Clean threads before applying thread locker.
WARNING
Torque wrench tightening specifications
must strictly be adhered to.
Locking devices (e.g.: locking tabs, elastic
stop nuts, self-locking fasteners, cotter pin,
etc.) must be replaced.
Hoses, cables or locking ties removed during a
procedure must be reinstalled as per factory
standards.
15-1-1. STEERING SYSTEM AND SUSPENSION
15-1-1