TGB BLADE 600 Service Manual page 127

5. ENGINE REMOVAL
Exhaust pipe nut:
Connector bolt:
Muffler mounting bolt: 25N-m (2.5kgf-m,
16.5lb-ft)
Apply sealant to the muffler mounting bolt to the
muffler fixed bolts and tighten them.
Apply sealant to the muffler mounting bolt to the
muffler fixed bolts and tighten them. (N/A)
Install 2 muffler's bolt comp. from the rear
frame.
At first, install blot,washer and bush with
specified torque
(30~40 kgf-cm).
Then, install the nut with specified torque
(250~300 kgf-cm).
5-11