12. COOLING SYSTEM
Oil Radiator
Check
Remove the protector, and check for any
leakage from weld seam.
Blow oil radiator clean using compressed
air.
If the oil radiator is blocked by dirt, use low
pressure water jet to clean it.
Remove two oil pipes.
Remove 3 bolts from the water radiator.
Remove the bolt of protector's upper right
corner and take down clip "P".
Installation
Install the removed parts in the reverse
order of removal.
Note:
Oil radiator's capacity is 170 ml.
Two oil pipes' total capacity is 190 ml.
If the oil content is empty in the engine
internal, oil pipe, and oil radiator, must to
add 3.86 L engine oil.
12-9