15-2. ELECTRIC POWER STEERING
Loose the clamp of anti-dust rubber.
Lift up and dismounting the EPS unit.
Take out the EPS unit from the left side of
vehicle.
NOTE: Be careful do not damage the cable of
torque sensor.
Remove the four bolts ① and the bracket ②.
②
Remove the two bolts ③ and dismounting the
brake distributor.
③
Torque: 280~320 kgf-cm
①
①
Remove the three bolts ①.
Lift up and remove the steering lower bearing
①
seat ②.
Torque: 280~320 kgf-cm
Installation
Install the EPS in the reverse order of removal.
②
15-2-13