Engine Installation - TGB BLADE 600 Service Manual

Engine installation

Remove the engine in the reverse order of
engine removal.
Caution
The engine mounting nuts are self-locking
once the nut was been removed it is no longer
of any use.
Be sure to use new nuts. For every time engine
installation and tighten them according the
torque standard.
Install the spring (shorter N/P 925334) into front
differential assy.
Install the spring into rear differential assy.
5. ENGINE REMOVAL
Torque value：5.4~5.9 kgf-m
Front Differential Assy.
5-9