TGB BLADE 600 Service Manual page 179

9-2. REAR DIFFERENTIAL
▪ Tighten the upper and bottom front end bolt as
shown.
Torque : 4.5~5.5kgf-m.
▪
Install and fixed the vent hose as shown.
NOTE: keep the vent hose away from the
exhaust.
▪ Install the cable, apply special tool #560023 to
adjust the length.
▪
Tighten the nut.
Torque : 1.2~1.5kgf-m.
▪ Reverse the removal procedure; install the
relative parts.
▪ Refill the gear oil to 500 cc and tighten the bolt
and washer.
Caution
Oil standard:SAE#90 hypoid gear oil
Oil capacity: 500 c.c.
Torque: 3.0~3.5 kgf-m
9-2-2