Rear Differential Installation - TGB BLADE 600 Service Manual

INSTALLATION
Reverse the removal procedure install the rear
differential.
▪ Apply grease into the propeller shaft end.
▪ Install the rear differential and insert the
differential shaft into the connecting shaft, put
the boot on the position as shown.
▪ Install rear brackets and tighten with bolts,
washers and nuts as shown.
Torque : 4.5~5.5kgf-m
▪ Assemble the upper bracket and tighten with
three bolts on the front top of rear differential
as shown.
Torque : 2.2~2.5kgf-m.
9-2.REAR DIFFERENTIAL
9-2-1