Steering Lower Bearing Seat; Control Unit Removal - TGB BLADE 600 Service Manual

15-2. ELECTRIC POWER STEERING

Steering lower Bearing Seat

Refer to the picture for install new bearing and
seal into the bearing seat then assemble the
bearing seat assembly.
① Steering Pad.
② Bearing Seat
③ Oil Seal
④ Bearing x 2
⑤ Cap
⑥ Washer
⑦ Plate Nut
⑧ Circlip
⑧
⑦
⑥
⑤
②
④
③
①

Control Unit Removal

Remove four mounting bolts.
Disconnect the wiring as follow:.
1. To fuse box. ②
① ⑤
④
2. To ECU, Speed Sensor and Ignition.
3. To Motor Power.
4. To Torque Sensor.
5.To Motor Control.
③
Remove the control unit.
Installation
Install the control in the reverse order of
removal.
15-2-14