Generator - TGB BLADE 600 Service Manual

GENERATOR

Install the key.
Install the one way clutch and generator rotor
sets.
Caution
Be sure the one way clutch on the crankshaft is
fitted into the generator rotor properly.
Tighten the generator rotor nut to the specified
torque with the special tool.
Generator rotor nut: 160 N．M( 16.0 kgf- m,
125 lb-ft)
Flywheel Puller (440664)
Install the output drive gear by installing the
snap ring.
11. CRANKSHAFT / CRANKCASE
11-15