Camshaft Pulley; Rocker Arm Assembly; Removal - Honda Prelude 1993 Service Manual

Hide thumbs Also See for Prelude 1993:

Table of Contents

Camshaft PulleY

1. To ease reassembly, turn the camshaft pulley untilthe

"UP" mark faces up, and the front timing mark is

aligned with the cylinder head upper surface.

Align front timing mark on

Pulley with the cylinder

head upper surfac€,

Remove the timing belt.

Remove the retaining bolt, the special washer, the

camshaft pulley and the key, then remove the back

Rocker Arm AssemblY

1. Loosen the sdjusting screws, then remove the bolts

and the rocker arm assembly.

. Unscrsw the camshaft holder bolts two tums at a

time, in a crisscross psnern to pre\€nt damaging

the valves or rocker arm assmbly.

. When removing the rocker arm assembly. do not

remove the camshaft holder bohs. The bolts will

keep the camshaft holders, the springs and the

rocker arms on the shafts.

Troubleshooting