Reset The Host Or Sp Using Oracle Ilom; Reset The Host Or Sp Using Back Panel Pinhole Switches - Oracle X5-4 Service Manual

Reset the Host or SP Using Oracle ILOM

"Reset the Host or SP Using Oracle ILOM" on page 64
■
"Reset the Host or SP Using Back Panel Pinhole Switches" on page 64
■
"Reset the SP Root Account Password or Recover the Root Account" on page 65
■
Reset the Host or SP Using Oracle ILOM
The Host Control and Reset (r) role is required to reset a service processor.
Before You Begin
1. Log in to the Oracle ILOM (web or CLI) for the server.
2. Reset Oracle ILOM using one of the following methods:
From the Oracle ILOM CLI, enter the command:
■
reset /SP
From the Oracle ILOM web interface, click ILOM Administration >
■
Maintenance > Reset SP.
Note -
log in again to continue working in Oracle ILOM.
Reset the host using one of the following methods:
3.
From the Oracle ILOM CLI, enter the command:
■
reset /System
From the Oracle ILOM web interface, click Host Management > Power
■
Control, then select your reset method from the drop-down list.
Reset the Host or SP Using Back Panel Pinhole
Switches
This section shows the location of the back panel pinhole switches.
64 Oracle Server X5-4 Service Manual • December 2015
Resetting the Oracle ILOM SP disconnects your current Oracle ILOM session. You must