Servicing Processors And Heatsinks (Fru); Replace A Faulty Cpu (Fru) - Oracle X5-4 Service Manual

Servicing Processors and Heatsinks (FRU)

Servicing Processors and Heatsinks (FRU)
This section provides procedures for removing and installing CPUs and heatsinks.
For processor overview information, see
information related to this component, see
Designations" on page
"Replace a Faulty CPU (FRU)" on page 180
■
"Remove a CPU Cover Plate (FRU)" on page 181
■
"Remove a Heatsink and CPU (FRU)" on page 186
■
"Install a Heatsink and CPU (FRU)" on page 193
■

Replace a Faulty CPU (FRU)

Disconnect the server from the AC power and protect components from ESD by wearing an
antistatic wrist strap.
For processor overview information, see
For serviceability considerations, see
Before You Begin ■
For CPU designation information, see
■
1. Remove the heatsink and CPU.
See "Remove a Heatsink and CPU (FRU)" on page
2. Install the CPU and the heatsink.
See "Install a Heatsink and CPU (FRU)" on page
180 Oracle Server X5-4 Service Manual • December 2015
"Processor Subsystem" on page
"Component Serviceability, Locations, and
69.
"Processor Subsystem" on page
"Component Serviceability" on page
"Component Designations" on page
22. For serviceability
22.
186.
193.
70.
73.