Oracle X5-4 Service Manual page 117

a. Power off the server.
Use one of the power-off options described in
Service" on page
3. Once physically at the server, If necessary, press the Locator indicator button to
deactivate the indicator.
4. Identify the storage drive you want to remove.
If you are hot-plugging a drive, ensure that the blue Ready to Remove indicator is lit.
See "Storage Drive Reference" on page
5. Push the storage drive's release button to open the latch.
6. Grasp the latch and pull the drive out of the drive slot.
Consider your next steps:
7.
If you are replacing the drive, continue to
■
If you are not replacing the drive,
■
(CRU)" on page 119
administrative tasks to configure the server to operate without the drive.
If you performed a cold-service procedure, power on the server.
94.
119.
"Install a Storage Drive (CRU)" on page
"Install a Storage Drive Filler Panel
in the empty drive slot to maintain proper airflow and perform
Remove a Storage Drive (CRU)
"Prepare the Server for Cold
Servicing CRU Components
118.
117