Turn On The Locator Indicator Remotely (Oracle Ilom Cli) - Oracle X5-4 Service Manual

Turn On the Locator Indicator Remotely (Oracle ILOM CLI)

Turn On the Locator Indicator Remotely (Oracle
ILOM CLI)
The Locator indicator helps you identify the a specific server in a rack.
1. Open an SSH session and at the command line log in to the Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
where ipadress is the IP address of the server SP.
For more information, refer to the Oracle X5 Series Servers Administration Guide at
www.oracle.com/goto/x86AdminDiag/docs.
The Oracle ILOM CLI prompt appears:
->
2. To turn on the Locator indicator, type the following command at the prompt:
set /System/ locator_indicator=on
Note -
To verify the status of the Locator indicator, type:
3.
–>
show /System/ locator_indicator
The output of the command appears:
/System
Properties:
locator_indicator = Off
The value locator_indicator shows the status as either On or Off.
Oracle Integrated Lights Out Manager 3.2.x Documentation Library at:
See Also ■
oracle.com/goto/ILOM/docs
108 Oracle Server X5-4 Service Manual • December 2015
ipadress
To turn off the Locator indicator, type:
set /System/ locator_indicator=off
http://
.
http://www.