Resetting The Sp; How To Reset The Ilom Sp Using The Web Interface - Oracle SUN Fire X4640 Diagnostics Manual

Resetting the SP

If you need to reset your ILOM service processor (SP), you can do so without affecting the host
OS. However, resetting an SP disconnects your current ILOM session and renders the SP
unmanageable during reset.
This section contains the following procedures:
"How to Reset the ILOM SP Using the Web Interface" on page 41
■
"How to Reset the ILOM SP Using the Command-Line Interface" on page 42
■
▼

How to Reset the ILOM SP Using the Web Interface

To reset the SP, you need the Reset and Host Control (r) role enabled.
Before You Begin ■
After updating the ILOM/BIOS firmware, you must reset the ILOM SP.
■
Log in to the ILOM SP web interface.
1
Select Maintenance –> Reset SP.
2
The Reset service processor page appears.
Click the Reset SP button.
3
The ILOM reboots. The web interface is unavailable while the ILOM reboots.
41