Oracle X5-4 Service Manual page 199

c. Use a number 2 Phillips screwdriver and alternately tighten each screw one-
half turn until all screws are completely tightened.
Prepare the server for operation.
14.
See "Prepare the Server for Operation" on page
15. If the CPU being installed is replacing a faulty CPU, manually clear the CPU fault
using Oracle ILOM.
See "Clear Hardware Fault Messages" on page
"Replace a Faulty CPU (FRU)" on page 180
See Also ■
"Replace the Motherboard (FRU)" on page 247
■
Install a Heatsink and CPU (FRU)
259.
91.
Servicing FRU Components 199