Oracle X5-4 Service Manual page 33

BIOS detects the Ethernet ports in the following order during server boot:
1. NET 0
2. NET 1
3. NET 2
4. NET 3
You can change the boot priority using the Boot Device Priority screen available in the
Note -
Boot menu of the BIOS Setup Utility.
The device naming for the Ethernet interfaces is reported differently by different interfaces
and operating systems. The following illustration explains the logical (operating system) and
physical (BIOS) naming conventions used for each interface.
Naming used by the interfaces might vary from that listed below, depending on which
Note -
devices are installed in the system.
Port BIOS
Net 3 8101
Net 2 8100
Net 1 0701
Net 0 0700
Solaris Linux
igb 3 eth 3
igb 2 eth 2
igb 1 eth 1
igb 0 eth 0
Server Subsystems Overview
Windows
net 4
net3
net2
net
Oracle Server X5-4 Overview 33