Oracle X5-4 Service Manual page 225

c. Connect the fan board data and power cables into the connectors on the
motherboard and partially tighten the two screws that secure the riser guide
to the chassis.
d. Tighten the three captive screws to hold the front memory riser guide in
place.
e. To secure the fan board unit in place, fully tighten the two screws that
secure the riser guide to the chassis.
8. Install the fan modules.
See "Install a Fan Module" on page
9. Install the memory risers.
See "Install a Memory Riser Card" on page
10. Prepare the server for operation.
See "Prepare the Server for Operation" on page
133.
152.
259.
Replace the Fan Board (FRU)
Servicing FRU Components 225