Oracle X5-4 Service Manual page 111

high-voltage areas inside the server. It also prevents an over-temperature condition which would
result from a disruption of the server cooling system.
Removing the cover when the server is powered on performs an immediate power off of the
server, which can cause loss of data and possible component damage.
Loss of data and possible component damage. Do not remove the server top cover
Caution -
until the server has been shut down to standby power mode. Removing the top cover from a
fully powered-on server results in an immediate server power off.
Ensure that the AC power cords are disconnected from the server power
1.
supplies.
2. To unlatch the server top cover, simultaneously lift both release latches and pull
the cover upward.
Remove the Server Cover
Preparing to Service the Server 111