Install A Dimm - Oracle X5-4 Service Manual

Install a DIMM

Install a DIMM
When servicing the components in this section, unplug the AC power cords and use ESD
protection.
Use this procedure to install a DIMM into a slot on a memory riser (MR) card.
For serviceability considerations, see
Before You Begin ■
For DIMM designation information, see
■
For reference information, see
■
1. Ensure that the DIMM ejector levers at both ends of the DIMM slot are in their
fully open position.
2. Align the DIMM with the empty slot.
Align the notch on the DIMM with the protrusion on the DIMM slot to ensure that the DIMM is
installed correctly.
3. Gently and evenly push the DIMM into the slot until the ejector levers rise and
lock the DIMM into place.
150 Oracle Server X5-4 Service Manual • December 2015
"Component Serviceability" on page
"Component Designations" on page
"Memory Riser Card and DIMM Reference" on page
70.
73.
154.