Change The Host Boot Mode Behavior At Reset (Oracle Ilom); Manage The Host Boot Mode Script (Oracle Ilom) - Oracle Netra SPARC S7-2 Series Administration Manual

Related Information
"Reset the Server (Oracle ILOM)" on page 31
■
"Boot Mode Overview (Oracle ILOM)" on page 49
■
"Oracle VM Server for SPARC Overview" on page 14
■
Change the Host Boot Mode Behavior at Reset (Oracle
ILOM)
The /HOST/bootmode state property controls how OpenBoot NVRAM variables are used.
Normally the current settings of these variables are retained. Setting /HOST/bootmode
state=reset_nvram changes the OpenBoot NVRAM variables to their default settings at the
next reset.
At the Oracle ILOM prompt, type:
-> set /HOST/bootmode state=value
where value is one of the following:
normal – At next reset, retains current NVRAM variable settings.
■
reset_nvram – At next reset, returns OpenBoot variables to default settings.
■
The state=reset_nvram property returns to normal after the next server reset or 10
Note -
minutes. (See
The config and script properties do not expire. Those two properties are cleared when the
server resets or when you clear them manually by setting value to '', which indicates an empty
script.
Related Information
"Reset the Server (Oracle ILOM)" on page 31
■
"Boot Mode Overview (Oracle ILOM)" on page 49
■
"Oracle VM Server for SPARC Overview" on page 14
■

Manage the Host Boot Mode Script (Oracle ILOM)

At the Oracle ILOM prompt, type:
"Display the Host Boot Mode Expiration Date (Oracle ILOM)" on page

Change the Host Boot Mode Behavior at Reset (Oracle ILOM)

Configuring Boot and Restart Behavior
52.)
51