Oracle X5-4 Service Manual page 145

Ensure that you replicate the same DIMM configuration on the replacement card.
Note -
5. Transfer the DIMMs from the slots on the faulty MR card to the same slots on the
replacement card:
Transfer the DIMMs from the faulty card to the replacement card one at a time.
Tip -
a. Remove a DIMM from the faulty MR card.
See "Remove a DIMM" on page
b. Install the DIMM on the replacement card.
See "Install a DIMM" on page
Repeat the above steps until all DIMMs are transferred from the faulty card
c.
to the replacement card.
6. Install the MR card.
See "Install a Memory Riser Card" on page
7. Prepare the server for operation.
See "Prepare the Server for Operation" on page
Remove a Memory Riser Card
When servicing the components in this section, unplug the AC power cords and use ESD
protection.
Use this procedure to remove a memory riser (MR) card to:
148.
150.
152.
259.
Remove a Memory Riser Card
Servicing CRU Components 145